Many homeowners long to replace their older, less fashionable and unattractive kitchen countertops. Wanting something stylish, gorgeous and still practical for their family’s everyday food preparation and cooking needs. Homeowners that have recently scoped out some of the latest new countertop material choices have been surprised by the cost.
By using affordable and attractive zinc metal sheets, those wanting to spruce up their kitchens with a fabulous new inexpensive countertop will be delighted.
Benefits of Using Affordable Zinc Metal Sheets to Make a Practical & Lovely Countertop
There are many types of materials being used today to create various types of kitchen or bath countertop surface. These look great but are also highly practical for everyday use. Marble, quartz, and granite counters are beautiful and will hold up well but can be costly. Older kitchen laminate products were cheap but didn’t hold up well through the years of use.
Connecticut Interior designers and homeowners are turning to unusual materials to get the countertops that they want. There are many terrific benefits of using easy-to-find and affordable zinc metal sheets. Readily found at supply retailers that sell building materials. Consumers can also get substantial savings when they shop at outlet building and metal supply establishments.
Some of these enticing benefits include:
- Surprisingly Attractive Appearance that Ages Well Taking on a Pewter Type Sheen that is Timeless & Vintage
- Exceptionally Durable
- Hides Scratches & Is Simple to Maintain
- Relatively Easy to Work with if Experienced with Working with Metals
- Blends with Many Kitchen Decor Themes Including Industrial Contemporary, Elegant Chick, Vintage Farmhouse or Country Casual
- Can be Left Natural or Textured for a Cool Antique Look
- Can be Found Discounted & Even Free from Discount Building Material Bargains
How To Create a Magnificent Kitchen Countertop Out of Zinc Metal Sheets
Take Measurements. This project requires a plywood or other counter underlay material. It’s important to accurately measure the thickness, width and length of the underlay. Add an additional 3/4 or more on both length and width in order to wrap the metal sheet around or fold-over the front and side edges. This will give it a smoother surface that won’t cut someone’s hands.
Cut Metal Carefully and accurately mark the sheet of metal with the measurements. Use a metal break or tin snips to precisely cut the metal sheet. If upgrading your kitchen sink, measure and cut out where the sink will be. Use a drill to make a positioning hole that enables the user to insert the tin snip point. Cut out the sink interior space where it and the additional fixtures will be located.
Attach Zinc to underlayment. Use a strong heavy-duty type of construction adhesive to attach the underside of the sheet metal firmly. Put a large piece of plywood on top of the metal sheet. This will ensure that the two surfaces will bond together,
Weigh down the plywood with heavy stack of books or another heavy object in order to secure the two surfaces together. This will give it a better and stronger overall bond. Make sure to firmly clamp down close to the metal zinc edges using thinner wood strips. This will help to protect the zinc against damage such as scrapes, dents or other mars. Let this dry at least overnight or as per bonding glue/adhesive instructions.
Bend & Fold-Over Edges First. Mark and cutout a square on each of the corners. Using the outermost point of the corner into the underlayment plywood corner point. Perform the fold-over motion by using a short smaller piece of wood and tap carefully with small mallet or hammer. This step should fold-over and under the frontal countertop facing keeping the creases sharp. Tap with wood lightly to get the metal to be very close to the counter surface for a cleaner look. After applying bonding adhesive. tack the folded piece of metal with small nails.
Soldering Corners Take a coil of zinc solder that is completely lead-free and apply first to corners just enough to help stick-down the solder materiel to the zinc surface. Pre-heat a soldering iron enough to melt this soldering material onto the now open corner seams for a flawless and crisp corner detail lines.
Give this time to fully harden, then use a grinder or metal file to even out those corners perfectly. If desiring a more shiny surface finish, take sandpaper of 100 grit and gently sand surfaces.
Use a smaller heat gun or torch to heat zinc sheets for easier bending. Your new and stunning zinc countertop should last for years and ages beautifully into an antiqued appearance.
This post is a collaboration and may contain sponsored affiliate links. All opinions are our own and for informational purposes only.